Level 3 City & Guilds plumbing. Leaks, blockages, dripping taps, faulty valves, hot water cylinders and full rough-in work for bathroom and kitchen builds. No guesswork, no return visits, no parts merchants making it up as they go along.
Scope scales with the size of the job, but these four areas are the spine of every one we do.
We trace a leak to the actual fitting, not the wet patch on your ceiling. Quick fix on copper, plastic push-fit or compression. No more "two plumbers have already had a go at this" follow-ups.
Stiff or weeping taps, isolation valves, stopcocks, ballcocks, hot water cylinders and unvented system service. Spare parts brought to site.
Slow drains, blocked WCs and outside drain runs cleared without smashing tiles or making a mess. Camera survey on tricky runs.
Pipework first-fix for new bathrooms and kitchens. Pressure-tested before plasterboard goes back on, photographed for your records.
Most south London leak callouts are same-day if you ring before mid-morning. We carry the usual fittings, isolation valves and stopcocks on the van so most leaks are sorted in one visit, not two.
We are not Gas Safe ourselves. We hold City & Guilds Level 3 in plumbing, which covers everything water-side: hot/cold, vented and unvented cylinders, bathroom and kitchen install pipework. For boiler and gas appliance work we bring in a Gas Safe engineer we know.
Yes. We pick the parts up from the local merchants and bill them through at trade. If you have a specific brand you want fitted (say, a particular shower mixer), we are happy to fit a customer-supplied part too.
Same team, every job, across SW4, SW8, SW11, SW12, SW15, SW17, SW18, SW19 and CR4.
Quick reply within a few hours, normally same-day quotes.